Chassis mounted IEC 320 thru connector

prowla

I'm just putting some bits into a 19" rack case and I'd like to have a single external facing IEC socket, along with jack & MIDI sockets, rather than trailing wires going inside the case.

I've got a 1U panel with holes in it and can easily get MIDI (DIN) and locking jack sockets, but I'd also like a mains connection.

Now, I could get an IEC 320 (kettle) socket and solder wires onto it on the inside (and appropriately insulate), but it occurred to me that it'd be a heck of a lot easier if there was a ready-made chassis-mounted sealed unit with an external-facing IEC male socket which simply went through to an internal-facing female plug.

I'm sure they must exist; can anybody point me at one?

Roland

Like this you mean? http://cpc.farnell.com/multicomp/jr-101/inlet-iec/dp/CN14818

Roland

Or like this? http://cpc.farnell.com/bulgin/px0675-63/iec-panel-socket-flange-fix-black/dp/CN08412

prowla

Thanks - I mean one which has an IEC plug on the back/inside rather than bare connectors.

So it's like an IEC F-M coupler with a chassis mount flange.