All sold

bassbora

I have gathered few pickups this last year after getting few guitars and upgrading and playing around with the electronics so I was going to try and get rid of the following since I have way too many gathering dust and someone else might find use for them.  They are all used and show some wear and tear but all in good working condition.  I hope I am pricing this fairly and if anyone is interested in more than one you can always make me an offer.  All prices include postage, I would prefer bank transfer but PPG is also an option.  If anyone wants any further information or pics just let me know.

I can provide screws of different sizes and spring if that is required.  

Dimarzio Dual Sound (DP101) F Spaced.  Dimarzio say its a more flexible Super Distortion.  Over 30 cm wire.  £45 £40 SOLD 
Edit: Screw holes seem to have been drilled direct mounting only to the body unless different screws with nuts are used.  
https://i.imgur.com/NFwdJ94.jpg

I took a single coil pickup from a Hamer Chap (1986) and it says nothing on it.  It works fine and measures at 8.9 k. 25 cm wire. £7  basically looking for postage if anyone is wanting to try it.  £5.
https://i.imgur.com/Ei88rUq.jpg 

First up is a pair of single coil pickups taken form a Hamer Centaura.  There is nothing written on them but I was told they were the original pickups so chances are these are Hamer Slammers made by Dimarzio for Hamer.  I dont know how to verify this but they measure 6.85 k and 6.66 k.  I would like £30 for the pair  SOLD
https://i.imgur.com/9WQ0OHz.jpg 

Seymour Duncan, I am not sure what this one is.  It did not have anything on the back but it has a braided wire and measures at 7.6 k  so I think it is a 59 rather than Jazz.  Over 30 cm wire.  £40 Since this one is a bit of unknown, as in either '59 or Jazz (this is a genuine SD, I can provide pics of the back) I am dropping it to £30. Sold
https://i.imgur.com/VHg0nnG.jpg 

Seymour Duncan STK6.  22 cm wire. £ 45 £40 SOLD 
https://i.imgur.com/Mu0Ytrt.jpg 

Seymour Duncan TB4, its the trembucker version of the JB (white).  10 cm wire. £45 I guess since this is white and with short wire this is not the most desirable but the wire was long enough for me in a Charvel 375.  £35 £30. SOLD 
https://i.imgur.com/rFZxPTg.jpg 

Dimarzio Evolution bridge (DP159) F Spaced black.  Over 30 cm wire.  £45 £40 SOLD
https://i.imgur.com/fIqxXAu.jpg  

Bill Lawrence L500XL.  30 cm wire.  £40 £30. SOLD
https://i.imgur.com/bcT5Vii.jpg 

Duncan Design HB103N this is based on the Seymour Duncan Distortion pickup.  25 cm wire.  £20 £15. 
Edit: I just noticed that the screw holes are very wide so a normal screw wont fit unless you are screwing directly into the body and have a spring in between.
https://i.imgur.com/IEGaJhW.jpg  SOLD

Funkfingers

bassbora said:

single coil pickups taken form a Hamer Centaura ...  nothing written on them ... they measure 6.85 k and 6.66 k. 
https://i.imgur.com/9WQ0OHz.jpg

The 1R self-adhesive label is indicative of a Seymour Duncan SSL-1 and the D.C.R. readings seem to back this up.

bassbora

Thanks for the info @Funkfingers someone will get a bargain 

revsorg

I would like the £30 pair please.

bassbora

They are on hold. Got a pm earlier. Someone spotted a bargain. If it falls through it’s yours 

revsorg

Huh.

revsorg

So, @bassbora what did the PM say?  Do tell.

bassbora

The PM said the same as you did @revsorg. ; I only said it was a bargain after @Funkfingers pointed out that they were most likely SD SSL1s.

These are priced to sell.  I hope I am asking a fair price as its roughly what I paid for some similar pickups.  I wont be using these since most of them came out of old guitars that I have bought this current year. 

I am just hoping to shift these and hopefully someone is out there looking for pickups in either a project or is upgrading.  If anyone feels I am pricing these wrong I am happy to hear that and people can always make me an offer and the worst I can say is no. 

Funkfingers

bassbora said:

I only said it was a bargain after @Funkfingers pointed out that they were most likely SD SSL1s.

Don't take my word for it. http://www.seymourduncan.com/faqs/labels-built-before-2002

bassbora

Funkfingers said:

bassbora said:

I only said it was a bargain after @Funkfingers pointed out that they were most likely SD SSL1s.

Don't take my word for it. http://www.seymourduncan.com/faqs/labels-built-before-2002

I will hold you personally responsible when I get sued for mis selling goods

Funkfingers

BOGOF!

Just don't hold me personally responsible for underselling.

bassbora

Bumpedy bump

bassbora

Bump 

bassbora

Bump

bassbora

Bump with a price drop

bassbora

Now is the time to buy your wife the Xmas present she has been wanting for years

bassbora

Your wife/husband needs new pickups for the project in the kitchen bump 

bassbora

I hear all the cool kids are putting old pickups in their guitars so I think you need some of these to be cool bump

Doug

Pm'd

bassbora

Bump cause you know you need a pickup.  I am going to have the SD TB sorted with a new wire if that is possible but I will pass some of that cost on so if you want to grab the pickup, now is the time my friend.

Bluesman1989

Swaps for 2 of them for a Whammy4 or Shredmaster? Preferably a Dimarzio and mayeb your white one?