Behold my massive board of pedals

GavRichList

I let the singer deal with the crowd; I enjoy the pedal alchemy.

Wazmeister

Just kicking some ideas about...

http://i1160.photobucket.com/albums/q493/Warren3333/PB 2016.jpg

Gassage

Wazmeister said:

Just kicking some ideas about...

http://i1160.photobucket.com/albums/q493/Warren3333/PB 2016.jpg

Ahhh...Waz's 'Recessionista' board.

I'll donate a penny or two to upgrade it...

MrSwanson

Warren looks awesome, and nice selection of pedals too

Wazmeister

Recessionista...

I have no idea what that means, but if I can fit it on the board, I will do 

JCA2550

dindude said:

Crappy iPad pic, but now wired up. I've tried pretty much used all of the main solderless options at one point or another, this time I've gone for Free The Tone jobbies - they are as easy to make as George L's, lop the end off, stick it in. Feels more robust though as it has a proper screw that tightens it against the sleeve - we'll see how they stand up over time.

The flip flop mod on the Gigrig QM is a revelation, to go from hairy tone (Sick As) to full on lead tone (LGW into Unimos) in one click (as a opposed to three) is a joy.

http://i1137.photobucket.com/albums/n505/dindude/1b10080b4ff4ce4bce4ed5646b989e36_zps1t3el0mp.jpg

How is the flip-flop set up on the QM4? do tell.

Gassage

Wazmeister said:

Recessionista...

I have no idea what that means, but if I can fit it on the board, I will do 

it's a great name for a pedal actually!

dindude

JCA2550 said:

dindude said:

Crappy iPad pic, but now wired up. I've tried pretty much used all of the main solderless options at one point or another, this time I've gone for Free The Tone jobbies - they are as easy to make as George L's, lop the end off, stick it in. Feels more robust though as it has a proper screw that tightens it against the sleeve - we'll see how they stand up over time.

The flip flop mod on the Gigrig QM is a revelation, to go from hairy tone (Sick As) to full on lead tone (LGW into Unimos) in one click (as a opposed to three) is a joy.

http://i1137.photobucket.com/albums/n505/dindude/1b10080b4ff4ce4bce4ed5646b989e36_zps1t3el0mp.jpg

How is the flip-flop set up on the QM4? do tell.

All four loops are set to flip flop.

The Swirl feeds the QM input and the delay comes off the output so each can be applied to any of the below sounds.

Loop 1 is Sick As on its own, this is my light gain sound.

Loop 2 is the LGW and Unimos in the same loop, and I can (pre)set for either or both to be on for various amounts of mid or high gain.

Loop 3 is the Hamstead Trem, I leave the independent clean boost on all the time for gain make up on the core amp clean - so switching this on is essentially my clean channel, and I can then kick the right hand footswitch on the Hamstead for some Trem when loop 3 is selected.

Loop 4 mutes and sends the signal to the tuner.

Wazmeister

Part II

http://i1160.photobucket.com/albums/q493/Warren3333/PB 2.jpg

hotpickups

Do you gig with this @Wazmeister? I'd find it quite hard getting my toe in between some of those foot switches. It's begging for a looper/switcher to go on there

Wazmeister;962284" said:

Part II

http://i1160.photobucket.com/albums/q493/Warren3333/PB 2016.jpg

Wazmeister

Gig with it ???

It's not wired up yet !!!!

No, I'm thinking of G2 ing it all

hotpickups

Where will the G2 go? You're gonna need a bigger board

Wazmeister;962291" said:

Gig with it ???

It's not wired up yet !!!!

No, I'm thinking of G2 ing it all

Cabicular

Get the extension pedal
That way you can try and wire it all underneath the board for maximum inconvenience

meltedbuzzbox

Wazmeister said:

Part II

http://i1160.photobucket.com/albums/q493/Warren3333/PB 2.jpg

this post has been flagged due to you removing the moogerfooger

Wazmeister

Moog sold....

G2 extension and load the rest underneath...

hotpickups

My problem I have with the G2 is the size really and the fact I probably wouldn't use half of its features That's why I went for simplicity and ease of use with my disaster area switchers/looper

Wazmeister

This is where I is at...

I might wire up this Salvage Custom board, with the G2 update... Then see how it all compares to the FX8. If there is no joy or unreal hassle, it will all go... And the FX8 will be kept !

andyoz

Here's my first pedal board effort from today. Just have to do the patch cables now.

TeeByrd

Thought I'd try out double the delays on my board today http://i1332.photobucket.com/albums/w613/FilthyFur/image_168.jpeg

samzadgan

GavRichList;961542" said:

Twinkly





http://i238.photobucket.com/albums/ff193/guitarsforminnaars/Mobile Uploads/3AE45D2C-991B-4AA6-A06B-283C97C3D463.jpg

I want to hear a sound clip with everything on!