GONE: Precision Fat Neck SG

photek · January 2018

Made from the Precision Guitar Kit by @kriszuki on here. Really good quality build, full width long tenon, nitro, not neck heavy! Intonates perfectly, holds tune extremely well and has a really low action, currently set up with 10’s. Comfortably better quality than a modern SG standard imo. Acoustically it rings and resonates beautifully.

Alegree Ibanez Super Distortion (copy) in the bridge which is nice and clear with plenty of punch and harmonics but with the volume backed off does a lovely clean tone and stays bright thanks to posh caps and CTS pots.

Vintage Ibanez Super 70 in the neck which is plummy and clear. I will include the matching Super 70 Bridge pickup as it seems a shame to break the pair up.

The neck has a big 50’s baseball bat profile, much the same as my R8 so it not one for those that like slim 60’s profile!

Here is the spec:

Heritage cherry nitrocellulose finish.

TonePros Vintage Wraparound Tailpiece Aluminium - Nickel

Kluson M33JP tuners

Vintage Gibson style 50s wiring.

22 Medium-jumbo frets,

12″radius fretboard,

24.625″ scale,

59 neck profile,

Pao Ferro ( Bolivian Rosewood ) Fretboard

Jescar fret wire Medium Jumbo, ( 6130 )

Frets dressed,

1 11/16″ nut width,

2 1/16″ at 12th fret,

1 3/8″ body thickness, with very clean cuts on the curves,

Bridge hole diameter is 7/16″,

Bridge spacing is 3.25″,

African mahogany body- two pieces,

11 degree headstock angle,

2.5 degree neck angle out of body,All conduits ready for electronic

Details of the kit here: https://precisionguitarkits.com/product/sg-jr-customizer

I paid Chris £400 which was a steal really so would like to see that back as a trade value. I don’t have a hardcase so collection / meet up Cambs area.

[img]https://i.imgur.com/HjW2BAf.jpg[/img]

[img]https://i.imgur.com/Yf31zEg.jpg[/img]

[img]https://i.imgur.com/FeRcryL.jpg[/img]

[img]https://i.imgur.com/P75Hx1i.jpg[/img]

[img]https://i.imgur.com/j36CS6b.jpg[/img]

[img]https://i.imgur.com/OSLALFx.jpg[/img]