Inadvertently duplicated post - please ignore

jaymenon

Musikraft Stratocaster Neck Maple Brazilian Walnut 1-11/16" nut 6100 SS frets £300

New, never been fitted

Original Musikraft box

Tru-Oil finish

Maple shaft  / Brazilian Walnut Fingerboard

12" radius

Nut Width: 1-11/16’

Stainless Steel 6100 Frets

Neck Profile: Medium C

HEEL: 2-3/16 (55.56mm) Standard Fender

TUNER HOLE: 11/32 Vintage Kluson

Single Acting Truss Rod with Vintage Double Slotted Adjustment Nut at the Heel

NUT SLOT: 1/8 Standard Fender Flat Bottom Style

SHAFT WOOD: Rock Maple

FB WOOD: Brazilian Walnut

FB STYLE: Slab Standard Fender

TOP DOTS & INLAY: Imitation Clay

SIDE DOTS: Imitation Clay 2mm

FRET WIRE SIZE: 6100 Stainless Steel

FB EDGES: Semi Rolled Standard

BACK PROFILE: Medium C 83 92

MOUNTING HOLES: Drilled Standard Fender Pattern

[Imgur](https://i.imgur.com/aGBBeDt.jpg)

[Imgur](https://i.imgur.com/DmgHGPP.jpg)

[Imgur](https://i.imgur.com/w8Cloi6.jpg)

[Imgur](https://i.imgur.com/O5aBLzx.jpg)

[Imgur](https://i.imgur.com/vpcfdmg.jpg)

[Imgur](https://i.imgur.com/ORbps5e.jpg)

[Imgur](https://i.imgur.com/Q4Zudre.jpg)

[Imgur](https://i.imgur.com/gnO4W3o.jpg)

[Imgur](https://i.imgur.com/6Yhy016.jpg)

[Imgur](https://i.imgur.com/L2kEFT2.jpg)

[Imgur](https://i.imgur.com/ynwZUp8.jpg)

WITHDRAWN

Kinman Traditional Mark 2 Stratocaster Pickups K9 Harness Loaded Black Pickguard £225

Black 3-ply pickguard.

The traditional Mark 2 sounds brighter than the Mark 3 - more sparkly and genuine vintage strat (I feel they dulled the mark 3 to highlight the sparkle of their Impersonator range)...

Bridge: Avn 62b

Middle: Avn 56

Neck: Avn 56

Plenty of quack in the in-between positions

Black pickup covers without the Kinman logo - the logo looks wonky and so I carefully removed it...

K9 harness:

1. Push-Push pot to switch position 2 (Bridge + Middle) between series & parallel

2. 2nd tone control: 'Neck Roll-In’

3. Choice of Tone Capacitors (22nf and Kinman’s Hi Definition Cap)

Output cable

Flat stagger

[Imgur](https://i.imgur.com/Bk4SMzC.jpg)

[Imgur](https://i.imgur.com/wGm28JG.jpg)

[Imgur](https://i.imgur.com/EvSPol6.jpg)

[Imgur](https://i.imgur.com/SlLxsSS.jpg)

[Imgur](https://i.imgur.com/Mmefhcv.jpg)

[Imgur](https://i.imgur.com/JPqnnQm.jpg)

SOLD

Musikraft Alder Body (sold on eBay)

Wudtone Holy Grail Bridge £70 SOLD

- 2-7/32” (56mm) screw spacing

- 2-11/16” (52.5mm) string spacing

- bent steel saddles

- Gilmour tremolo arm 

Wudtone Constant Pivot Vintage 50s Tremolo Bridge £70 (sold on eBay)

2-1/16" (52.5mm) string and screw spacing 

(Fits the alder body perfectly)

Bevelled Steel Block with Delrin insert by Kevin Hurley (who makes trem blocks for Wudtone)

Tremolo arm with cream tip

Bent steel saddles, Whacker Plate, Hardened steel screws, Claw, Springs etc...

Set of Kinman Woodstock Plus Strat pickups SOLD

White covers

Graduated pole spacing (52.5, 51 and 49.5mm)

Flat stagger (supposedly better for Warmoth and Fender compound radii, though I must admit, I have a 7-14” radius set on my Warmoth Strat and don’t hear a string balance problem).

Stratocaster Body including Non-Fine Tuner Floyd Rose Tremolo £250

- One piece Swamp ash

- Tobacco Sunburst / Nitrocellulose Finish by Rich Rendall (lam68)

- Contoured Heel

- Shielded with graphite paint

- 1.83kg (4lbs)

- Includes 

     - Tremolo

     - Three pickguards (black, white and parchment)

     - US Deluxe style Neck plate and screws

[Imgur](https://i.imgur.com/9t9pKDK.jpg?1)

[Imgur](https://i.imgur.com/9t9pKDK.jpg?1)

[Imgur](https://i.imgur.com/eoyKpaG.jpg)

[Imgur](https://i.imgur.com/wV9QUxK.jpg)

[Imgur](https://i.imgur.com/mEBzWxJ.jpg)

[Imgur](https://i.imgur.com/FdsfR7j.jpg)

[Imgur](https://i.imgur.com/pI0mgMs.jpg)

[Imgur](https://i.imgur.com/Sk3NO8Q.jpg)

[Imgur](https://i.imgur.com/KOgloBO.jpg)

[Imgur](https://i.imgur.com/SS0iAm4.jpg)

[Imgur](https://i.imgur.com/q8BlGrC.jpg)

[Imgur](https://i.imgur.com/nERkwik.jpg)

jaymenon

Bump

jaymenon

Bump

lento

Are you keeping the neck ? 

jaymenon

Hi Lento

I hadn’t originally planned on selling the neck, which was made for me by Martin Sims.

However, if it would be more convenient for someone to purchase the guitar as a whole - then yes I would consider selling it. 

Another option is of course to buy the fully loaded body (with the loaded pick guard) - so all that remains would be to attach a neck...

Martin Sims Neck £300 (cost me £450): 

- Slim C
- Birds Eye Maple
- Dark Indian Rosewood fingerboard 
- 16 inch radius 
- 22 x Stainless Steel 6100 frets (1.4mm high x 2.8mm wide)
- Back angled headstock - with scarf joint
      (no need for string trees)
      (no risk of headstock breaks)
- Bone nut with beautifully cut slots 
- Generic locking tuners (do the job perfectly) 
- Rich Rendall (lam68) could easily remove my name from the headstock and put on a custom decal of your choice

Loaded pickguard (£200)
Kinman Traditional Mk2 flat stagger with K9 Harness
Allows 
2nd tone pot is a push-push for series / parallel switching of Bridge + Middle pickups
2nd tone pot is a Neck roll-in / roll-out

[Imgur](https://i.imgur.com/D9VkO0j.jpg)
[Imgur](https://i.imgur.com/AmZzFZi.jpg)
[Imgur](https://i.imgur.com/8rWBhbZ.jpg)
[Imgur](https://i.imgur.com/EHqSssg.jpg)
[Imgur](https://i.imgur.com/AFinSzf.jpg)
[Imgur](https://i.imgur.com/oR8QMO5.jpg)
[Imgur](https://i.imgur.com/eXfSYoX.jpg)
[Imgur](https://i.imgur.com/WUeGsHi.jpg)

lento

Thanks for the reply Jaymenon. A lovely looking guitar and I'm also a fan of a flatter radius on fretboards.
My Yamaha's are 13.75.

I'll be thinking this over regarding the whole guitar .....

Are you anywhere near Manchester ?

jaymenon

I have a Yamaha SA700 that's 13.75 too...
I live in Great Yarmouth - Norfolk.

Kvaksalver

Arw, this would go well as a companion to my Ibanez AT...

jaymenon

Bump 

jaymenon

Bump

jaymenon

Bump

jaymenon

Bump

jaymenon

Some new stuff added...

jaymenon

Bump

jaymenon

Bump