Castor hunt - ones with a baseplate (2.25in x 2.5in)

What's Hot
Drew_TNBDDrew_TNBD Frets: 22445
Hey guys,

This is one of those lame as "do a bloody search!" questions. But I'm hoping the more knowledgeable folk will know proper measurements. Basically my cab has these on the bottom:

image

Not the castor itself. But the baseplate with a screwhole *and* a slot - you can just about make out the grooves where the base plate slots into.

So effectively I'm looking for some castors that will fit. I've measured the gap it needs to fit into and it is 2.25in wide (groove to groove) and 2.5in long, button to bolt. The groove itself is 3mm, so the baseplate of the castors cannot be any bigger than that.

Reason being, the current ones I have don't have a baseplate, and the screws fall out of the holes. I can't use bigger screws because the metal plate on the bottom of the cab has holes in it that are a certain size. I suppose I could make them bigger, but would rather not mess about drilling them.
0reaction image LOL 0reaction image Wow! 0reaction image Wisdom

Comments

Sign In or Register to comment.