Recommend me an acoustic with electric-like action

What's Hot
Having sold my Lowden, I'm missing having a steel string acoustic around. But because of painful joints, I can't play a regular acoustic now.

So what would you recommend for a good quality acoustic with a very low action - is there such a thing? I've played Yamaha APXs but the action is still a bit high.

Budget around £2K.
0reaction image LOL 0reaction image Wow! 0reaction image Wisdom

Comments

  • woodywoody Frets: 74
    Taylors are always very easy to play,although i wouldnt claim to be a fan..i have a huss&dalton cm custom which plays beautifully..very slim electric like neck..
    0reaction image LOL 0reaction image Wow! 1reaction image Wisdom
  • ThorpyFXThorpyFX Frets: 6130
    tFB Trader
    mellowsun said:
    Having sold my Lowden, I'm missing having a steel string acoustic around. But because of painful joints, I can't play a regular acoustic now.

    So what would you recommend for a good quality acoustic with a very low action - is there such a thing? I've played Yamaha APXs but the action is still a bit high.

    Budget around £2K.

    buy a more budget guitar and have it professionally setup? It'll get you into the low action place faster than any other method
    Adrian Thorpe MBE | Owner of ThorpyFx Ltd | Email: thorpy@thorpyfx.com | Twitter: @ThorpyFx | Facebook: ThorpyFx Ltd | Website: www.thorpyfx.com
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • I would say Brook. Some of the easiest playing acoustics I have ever come across. Have had quite a few over the years and all were the same. If you don't mind the skinny neck, all good. Budget about right too.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • vizviz Frets: 10691
    Go for an electro-classical nylon strung. Like the alhambra z natural ez.
    Roland said: Scales are primarily a tool for categorising knowledge, not a rule for what can or cannot be played.
    Supportact said: [my style is] probably more an accumulation of limitations and bad habits than a 'style'.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • Thanks for the suggestions! I have an electro-classical nylon string already, but am missing that steel string tone (probably down to listening to the new Tommy Emmanuel album recently).

    I'll check out Brook and Huss&Dalton.

    Like the idea of a cheaper guitar set up properly. Will investigate Faith as these are supposed to be the pick of the bunch.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • equalsqlequalsql Frets: 6104
    Walden.
    Especially the Natura series. Solid wood beauties.
    Very skinny necks stabilised by twin carbon fibre rods. Seriously low action too so great for electric players wishing to try acoustic.  Yes and they sound lush!
    (pronounced: equal-sequel)   "I suffered for my art.. now it's your turn"
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • A shorter scale length, such as a Martin OM or some Gibsons, with 12s (or lighter).

    If you aren't concerned about absolute volume and power, a Taylor GS Mini with lightish strings would be a good call.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • crunchmancrunchman Frets: 11446
    Not sure whether Brook or other skinny necks are the best idea.  I find it more comfortable playing something with a bit more depth.  If you are playing open position chords then Brook are probably not a great idea.  The fingerboard is very flat.  It's a lot easier to play chords when there is a bit of a radius.

    Would echo what has been said about shorter scale lengths so there is less tension.

    It's been mentioned above but thin strings are the most obvious.  I used to use 10's on my acoustic for a while.  They are not ideal tonally but they are ok.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • How about a Variax?
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • mellowsunmellowsun Frets: 2422
    edited September 2015
    I don't like skinny necks. Sounds like short scale, low tension strings and low action could be a good solution.

    On thing I tried before was a set of 10s but with the top E from a set of 12s. This gave a fuller sound.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • FelineGuitarsFelineGuitars Frets: 11594
    tFB Trader
    I have a great Alvarez that I refretted with jumbo wire after re-doing the inlays with maltese crosses that has very low action. 
    It's a dreadnought size and also has an Earvana nut so i sounds very in tune.
    Solid spruce top and laminate mahogany back and sides

    £399 or close offer.


    image

    Many guitars have a re-sale value. Some you'll never want to sell.
    Stockist of: Earvana & Graphtech nuts, Faber Tonepros & Gotoh hardware, Fatcat bridges. Highwood Saddles.

    Pickups from BKP, Oil City & Monty's pickups.

      Expert guitar repairs and upgrades - fretwork our speciality! www.felineguitars.com.  Facebook too!

    0reaction image LOL 2reaction image Wow! 0reaction image Wisdom
  • EvilmagsEvilmags Frets: 5158
    Thomastik Infeld do low tension strings with silk wraps under the steel wrap. "Silk and Steel" accoustics are quite specialist but it might be worth trying one. 
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • Bluesman1989Bluesman1989 Frets: 66
    edited September 2015

    I've got a brand new Collings OM2H going if that would be any good for you? And you could stretch a little past 2k :)

     

    If not and you could find the time to get down to TAMCO in Brighton, Trevor has a great selection to try

    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • EvilmagsEvilmags Frets: 5158

    The actual action on an acoustic can be adjusted by a tech. If you want to reduce tension then silk and steel is worth a look at as are lighter strings with a lightly braced guitar. (Guitars built to take gauge 13s sound awful with 10s on them). The silk adds weight without adding tension and while it wont sound like a dreadnought with big strings it does sound nicer than very light acoustic strings, which lose the bell like tone that acoustic needs. 
    0reaction image LOL 0reaction image Wow! 2reaction image Wisdom
  • A shorter scale length, such as a Martin OM or some Gibsons, with 12s (or lighter).

    I agree on short scale length.

    The rest is in the setup.

    You can get 10-47 sets of daddarios that will be really light to play.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • mellowsunmellowsun Frets: 2422
    Thanks for the further suggestions. I've never tried silk and steels so will check them out.

    I don't get on with dreadnoughts unfortunately, OM or OO are more my thing.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • ICBMICBM Frets: 72311
    Something like a Taylor 3 size - or whatever they call it now, the smallest one anyway - strung with 10s and with a good set-up will get you electric-like playing ease, and the tone won't suffer anywhere near as much as if you tried the same thing with a Martin Dreadnought for example.

    "Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski

    "Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein

    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
Sign In or Register to comment.