›

Marshall super bass

What's Hot
2»

Comments

  • SunDevilSunDevil Frets: 511
    If you want the non-MV plexi experience without needing a big room to play it I’m, what about pulling 2 (inside or outside pair) of the EL34s to bring down the headroom (remembering to drop the impedance, so run the amp at 8 ohms into a 16 ohm cab)!

    combine that hat with a smaller dose of attenuation maybe?
    The answer was never 42 - it's 1/137 (..ish)
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • ICBMICBM Frets: 72245
    SunDevil said:
    If you want the non-MV plexi experience without needing a big room to play it I’m, what about pulling 2 (inside or outside pair) of the EL34s to bring down the headroom (remembering to drop the impedance, so run the amp at 8 ohms into a 16 ohm cab)!
    That works, but only gives a 3dB reduction which is not a lot really.

    "Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski

    "Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein

    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • Phil_aka_PipPhil_aka_Pip Frets: 9794
    I've got a 100W SuperLead. It's ANIMAL. Haven't gigged it in years (used to get told to turn it down even when using a 45W Plexi). Great for recording though with an SE100.
    "Working" software has only unobserved bugs. (Parroty Error: Pieces of Nine! Pieces of Nine!)
    Seriously: If you value it, take/fetch it yourself
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
Sign In or Register to comment.