Various bits - bridges, pick ups, fixings etc

abw1989

Happy to combine postage on all of these. Postage will probably the price of a stamp for most as they should fit in an envelope, pick ups withstanding. List first, pics at the bottom. Let me know if you want more measurements or pics of anything.

Available:

Gold neck screws - used, some tarnishing around the screwdriver bit - FREE

Gold ToM bridge #1 - 90% sure Gibson spacing, faux ABR studs and bushings, plenty of tarnishing - £4

Generic humbuckers - I think from a Harley Benton Kit guitar, never installed, with screws and springs, marked N and B - £8 set

Sold:

Mighty Mite single coils - black, 24cm wiring, 90% sure neck and middle - £10 set (SOLD) 
Gold ToM bridge #2 - 90% sure Epi/import spacing, studs and bushings, some tarnishing, marked BM003 - £4 (SOLD) 
Diago 9V to 18V converter - £5 (SOLD) 
Bag of picks - all sorts in there, find your next gem - FREE (GONE) 
Volume and tone knobs - yellow/gold with silver reflector, fits the narrower import pot shaft- £4 (SOLD) 
Warman brass nut - 42mm spacing, precut slots - £2 (SOLD) 
Gold ToM tail piece - 90% sure Gibson spacing, studs ONLY, tail piece good condition, stud tops tarnished, marked K01 - £4 (SOLD)
3 x black humbucker rings - heights marked in the image - £3 (SOLD)
Epiphone humbuckers - taken from a 2008 LP Plus Top Pro, good condition, wire for LP routing, labeled underneath - £15 set (SOLD)
Entire Gibson LP gold hardware - Locking Grovers, Switchcraft switch, Switchcraft toggle, Kluson bridge, Kluson tailpiece, truss rod screws... (I think the only thing missing would be back plate screws) - £80 set (SOLD)
Hard Tail Strat Bridge - black, never fitted, string through only - £10 (SOLD) 

  
  
  
  
  
  
  

robwright

Can I take the brass nut and mighty mite pups? 

Neckwringer

pm sent....

prudd

I will take the Epiphone pickups if still available. 

prudd

prudd said:

I will take the Epiphone pickups if still available. 

Sorry mate , ignore that last post, just realized I need short leg p/ups to fit where they are going

Jaycee

prudd said:

prudd said:

I will take the Epiphone pickups if still available. 

Sorry mate , ignore that last post, just realized I need short leg p/ups to fit where they are going

In that case may I have them please and the rings if the pickups are available

RickLucas

I'll have the Diago please.

Jaycee

Received with thanks

abw1989

Few bits still here

abw1989

Updated with LP hardware set

abw1989

Here are the LP hardware pics. Most of this is from a 2013 Signature T so has some wear / tarnishing. The Kluson bridge and tailpiece are approx 14 months old from fitted so have a little less wear!:

  
  
  
  


I'd prefer to sell as a whole set; but if there is something you really, really want on it's own, let me know.

abw1989

Bump for bits

abw1989

Full LP set and misc other bits still around

abw1989

Come get your bits

abw1989

Gold LP set sold, other bits still available 

abw1989

Black Strat bridge sold