Help with wiring please

Flip

I wonder if some kind person can help me with a small wiring problem. I attach a photo of the loom I've extracted from a 3/4 size Chiese strat copy I bought for my grandson. When I got inside I found the circuit fairly wrecked. The loom consists of a single neck pup, a 'double' bridge pup, a 5-way selector switch and a tone and vol pot. The tone pot is all but destroyed.

A group of wires comes from the 'double pup which I take to be a humbucker that can be switched via the 5-way switch to a single coil. Of the wires leading from this pup the black is soldered to contact 1 of the 5-way switch, the red to no 2, the green and the braid to the grounded pot case while the white is unsoldered.

Could someone kindly suggest to what I should solder this white wire?

Many thanks

Flip

SteveRobinson

It should go with the red. This is the coil link that is connected via the switch to the black wire when the coils are split.

Flip

Thank you, Steve, much appreciated.