It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
If you don't have a multimeter to test it, you can do it with the amp... first identify which of the leads is the return - it should be the red cable connected to the output of the tank, but isn't always if someone has been at it already - and touch the tip while carefully turning up the reverb, it will buzz loudly. Once you're sure which is the return connect that to the output end of the tank and shake the tank - if you get the usual reverb crash, the output is working. Then connect it to the input end and shake again - if that also crashes (quieter) then the input end is also OK. If one end doesn't work (usually the output) they can sometimes be repaired fairly easily, but replacements aren't that expensive.
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein
It was excellent. Way better than the following Valvestate models.
I’m so bored I might as well be listening to Pink Floyd