It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
Simply connect both switch rotors to the volume control, and then you can select any two pickups in any position. Treat the hot and tapped outputs as if they're separate pickups.
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein
Formerly TheGuitarWeasel ... Oil City Pickups ... Oil City Blog 7 String.org profile and message
I guess a Diesel Tap would probably work best with the mini HB (Seymour Duncan, either Vintage or Seymourized, can't remember which I have), just to keep as much clarity as possible in the mid position.
I'll need to look into a custom scratchplate too, I suppose. I think the tele (2007 US standard) is routed for neck HB as stock. I already have a spare push-pull tone, I'll need to check the impedance...
I have a normal 3 way switch so if I can't do the parallel/series thing anymore it's not the end of the world.
You also need to make sure the bridge pickup doesn't have a grounded baseplate, but if it does it's easy enough to fix.
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein