It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
Ross
Thanks Ross...
Something else that's looking eye-catching is your KM-II - it's looking very shiny at the moment, last (hopefully) coat of oil went on this morning so we're nearly there
Latest build to be completed; custom 6-string KM-II with Black Walnut body, Maple/Black Walnut neck, Cocobolo fretboard, Gotoh hardware and BKP Nailbomb covered set, finished with Tru-Oil...
Ross
Thanks Ross, not too much longer to wait now
Next build I'll be completing is a custom carve-top KM-I - Wenge on Mahogany body, 5-piece Maple/Purpleheart neck, Ebony fretboard, Floyd Rose, Schaller M6 tuners and BKP Cold Sweat (N)/Miracle Man(B). The first coat of Tru-Oil was laid this afternoon, aim to be finished by end of first week of May...
Finished with Tru-Oil, our first KM-III is being put together now...
Ash body w/Zebrano top, Wenge/Sapele neck w/white pinstripes, Ebony fretboard...
It's finished, my first KM-III - Zebrano top on Ash body, Wenge/Sapele neck, Ebony fretboard, Hipshot bridge, Gotoh tuners and Tru-Oil finish...
A couple more pics of the latest build (KM-III #1)...
2 weeks of Tru-Oil coats to fill the Wenge pores/grain and we're almost there (custom 6-string KM-I carve-top)…
Thanks rsvmark. I completely understand my builds are not to everyone's liking, but I appreciate the positive comments regardless
Started work on this next build today, which makes use of this stunning Ziricote top and Macassar Ebony fretboard blank. The guitar itself will be the first Kemp Guitars DC and defines my personal taste in specification - natural woods and minimal features. Watch this space!
That Ziricote top now glued to a Sapele body, shaped and edges rounded over (going for traditional styling with this one). Neck is also Sapele (three-piece) with Ziricote headstock veneer.
Working on the new DC today, decided to carve out a scoop in the lower cutaway. Looking at it now, it needs to be deeper, yes? Think 80s ESP Horizon
Opened up that scoop a little more today... much happier
So, the DC is nearing completion now and specification is confirmed as Gotoh TOM and tuners, Seymour Duncan Distortion pickup (zebra-coil pickup shown is for display purposes only) and Tru-Oil finish...
Quick catch-up... The Wenge carve-top KM-I ready for setup...
And an idea of how that DC's Ziricote top will look when finished...
Custom KM-I carve-top finished - Wenge on Mahogany body, 5-piece Maple/Purpleheart neck, Ebony fretboard, Floyd Rose Original, Schaller M6 tuners, BKP Miracle Man (bridge)/Cold Sweat (neck) and Tru-Oil gloss finish...
That Ziricote top will be next... Then some new stuff coming