SCAMMER WARNING: Due to a spate of recent scam attempts (some successful) recently, if you're doing a deal in the classifieds, ONLY USE PAYPAL GOODS AND SERVICES UNLESS YOU KNOW THAT INDIVIDUAL PERSONALLY. It's really not worth saving a few quid.
FS: USACG strat neck SOLD, Gibson control PCB
SOLD
I have a lovely handmade USA Custom Guitars strat neck for sale. Specs below:
- One piece maple neck with beautiful rosewood fingerboard
- Large headstock with 10mm holes
- Vintage tint finish
- Width at nut is approx 42.91mm
- Width at 12th is approx 52.21mm
- Thickness at 1st is approx 21.47mm
- Thickness at 12th is approx 22.74mm
- Bone nut
- 22 frets in excellent condition
- Fret wire is approx 2.70mm wide by 1.21mm tall (possibly 6130 or 6150)
- Truss rod adjustment is at the heel
- I am unsure of the radius but it feels around 10-12" (flatter than my US Pro Tele which is 9.5")
- I would describe the neck carve as a 'C' shape
- It came to me with an 'F' style logo
£150 including RMSD to you.
Next I have a control PCB from a 2014 Gibson Les Paul Classic:
- Individual neck and bridge volume with push/pull pots for coil split
- Global tone control
- Mini toggle that controls a boost circuit which can be adjusted with a trimmer pot
- Three gold speed knobs
£40 including RMSD to you.
Thanks for looking!
Comments
And if so, is it easy to remove the ends from the connectors?
To use pickups that don't have Gibson Quick Connect you would need something like this:
http://www.ebay.co.uk/itm/Gibson-Quick-Connector-Kit-for-2014-Onwards-Gibson-Guitars-5-Wire-Version-/162655683733?hash=item25df08c495:g:v8QAAOSwWxNYngdY