It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
is it crazy how saying sentences backwards creates backwards sentences saying how crazy it is?
Switched on my PG today and every patch is defaulting to EXP1 wah. The red light is on, but it is in normal volume mode and when I press, the wah will be engaged; the red LED stays constant. But when I repress the wah switches off but the EXP2 volume green LED does not appear - it stays on LED1 red & I have no volume control function. The green Exp2 light won't come on in any patch, even though the volume pedal in the preset is being shown as on - so I have no volume control - I'm hearing the patch fine, but I can't seem to get the volume to go up/down with pedal movement which should be a default setting. It's as if some global change has occurred but I haven't touched any global setting.
Needless to say I've rebooted my PG and PG Edit. It's like the EXP1 has taken control. The default should be the green volume and it then changes to red and switches to EXP 1 only when wah is engaged. But that isn't what's happening. I tried reverting to a previous back-up, but no difference. The EXP pedal 'clicks' but the Vol Exp2 green LED light does not engage. I'm now thinking that this might be a physical 'switch' issue rather than being a software related problem, & if that is the case it will have to go back to Yamaha for a replacement.
I've opened a ticket but if anyone here can help, I'd be pleased to hear from you. Many thanks.
is it crazy how saying sentences backwards creates backwards sentences saying how crazy it is?
is it crazy how saying sentences backwards creates backwards sentences saying how crazy it is?
Through the parallel FX return of my 2 channel Valvestate 8080 I get tons of volume and the master volume on the amp controls volume. But through the serial fx return of my Laney Cub12R I don't get the volume and the amp volume dial doesnt do anything, so I can only control volume through the Pod Go. I'm unclear why the Cubs amp volume isn't doing anything. Anyone have any thoughts?
I've been using my new Pod Go directly into some PreSonus studio monitors. But today I've had a go with my amp, with and without the effects loop. I read some info about using the effects loop, saying to connect the 'amp out' on the Pod to the 'FX return' on the amp. This is where I'm a little unsure really. These are the various options I've tried:
Pod Amp Out > Amp input - Pod master volume does nothing - Amp volume works normally
Pod Amp Out > Amp FX return - Pod master volume does nothing - Amp volume does nothing (but fixed low volume)
Pod Main Left Out > Amp FX return - Pod master volume works - Amp volume does nothing (but fixed low volume)
Pod Main Left Out > Amp input - Pod master volume works - Amp volume works normally