It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
I think Analogman will mod pedals to include his buffer, but I'd rather not look across the pond.
I’m hoping to get a TT soon. They look awesome!
You can fit one of these under a Nano, I know cos that’s what I have done. Away at the moment so can’t share a pic though
https://www.fredric.co.uk/klon-corn-buffer-clone
(mine’s actually the Klon only one but same size)
https://www.thegearpage.net/board/index.php?threads/mod-a-pedal-to-be-buffered-bypass-turbo-tuner.1309517/
if that's the same tuner you've got, then you can run another pcb from the power going to the led and put a fuzzdog klon buffer (or similar) between the input's hot and the footswitch.
If you want someone else to do it for you,
The pcb and components will cost around £12
The building of, testing of and mounting will probably be upward of £50
Post and packing on top of that
Modding the pedal will decrease it's value, but a good electronics guy should be able to make it reversible for a small up-charge.
A small potting box could be used, in this guitar cable I built the box contains a stereo headphone amp with a 3.5mm breakout and a stereo volume control for IEM's ... so a simple unity gain buffer with no controls could easily be built in a smaller box and just sit between the pedals halfway in a patch cable. For power just use a female end of a 9V extender.
R.
Eqd Speaker Cranker clone
Monte Allums TR-2 Plus mod kit
Trading feedback: http://www.thefretboard.co.uk/discussion/60602/