It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
Could I use the thru outputs on each monitor to daisy chain them is possible?
Stage monitors typically receive a different mix to FoH, which can be done in various different ways, but for small-scale systems it's often done with Aux sends, Aux 1 => monitor mix one, Aux 2 => mix two, etc.
What's the desk?
Eqd Speaker Cranker clone
Monte Allums TR-2 Plus mod kit
Trading feedback: http://www.thefretboard.co.uk/discussion/60602/
What's your budget?
Eqd Speaker Cranker clone
Monte Allums TR-2 Plus mod kit
Trading feedback: http://www.thefretboard.co.uk/discussion/60602/
HTH,
R.
Eqd Speaker Cranker clone
Monte Allums TR-2 Plus mod kit
Trading feedback: http://www.thefretboard.co.uk/discussion/60602/
Or buy a headphone amp with multiple outs
If you can run to £219 though then the ui12 from Soundcraft will give you 3 aux sends ... although it looks like there's only 2 you can use the headphone socket as a proper aux send if you route it in the software. You also get wireless control, USB record and decent quality effects. This things are crazy cheap. I use the big brother ui24 version.
If your speakers don't have a link output, you can use a simple XLR y-split cable. When splitting outputs like that, you don't need any fancy electronics in between. There's a small loss in signal level but it'll be barely enough for you to notice. Example here: https://www.gear4music.com/G4M/Dual-XLR-M-XLR-F-Splitter-Cable/2M1I?origin=product-ads&gclid=Cj0KCQiAqvaNBhDLARIsAH1Pq51IX0vTUiB-rXw7tFKjfFPcfANmaSv63OmxuDynbK0FUczBRbxaWs0aAgzHEALw_wcB