SCAMMER WARNING: Due to a spate of recent scam attempts (some successful) recently, if you're doing a deal in the classifieds, ONLY USE PAYPAL GOODS AND SERVICES UNLESS YOU KNOW THAT INDIVIDUAL PERSONALLY. It's really not worth saving a few quid.
TRADED Collings CJ45T Cambridge
What's Hot
Back for sale and open to trades. Looking for a 00 sort of size…
Stunning Collings CJ45T for sale - big price reduction for a quick sale - no offers at this price as it’s just not worth me loosing anymore money on it.
Price (assumed bank transfer, PayPal gift or cash - Can do normal PayPal if you cover you're fees:)
£4500 (reduced from £4750)
Do have proper packaging if you want to have it collected.
I’m near Linton, Cambridge. CB21
——-
I played this heavily and just couldn't put it down. There are swirls in the Nitro finish on the back from shirt buttons (I’ve polished most of these out and can supply new photos), one small ding on the top, one odd little tiny mark that looks like a dribble, but just won't come off so assume its in the finish, one small dink on the side (all have images in the link below). Frets are good, truss rod works as it should. Comes with its case and warranty card.
If you wanted a new one, it would be at around £7500
If you like thin modern necks, this is not for you. Its a handful, but so worth it! Its not quite a Banner J45, but its no Taylor!
What Collings say:
As with all of our Traditional Series guitars, when it came time to add a “T” designation to our slope-shoulder offerings, we didn’t simply tweak the original; the all-new Collings CJ-45 T is a fully re-imagined instrument that offers a distinct tonal variation when compared to our CJ and CJ-35 models.
Video worth checking out... Also Bob Minners whole album "Solo" was recorded on his new CJ45T
https://www.youtube.com/watch?v=IA8O6SftFMwNeck:
Spec:
Top | Sitka spruce |
Back & Sides | Honduran mahogany |
Construction | Traditional Series Build and Voicing |
Neck | Honduran mahogany |
Body Binding | Ivoroid with no purfling |
Fingerboard Binding | None |
Peghead Binding | None |
Bridge | Ebony straight-style with 2 5/16" spacing |
Fingerboard Radius | 12" |
Fingerboard | Indian rosewood with 19 frets and MOP long dots |
Bridge Pins/End Pin | Ivoroid with no dot |
Nut | Bone, 1 3/4" |
Saddle | Bone, cutthrough |
Neck Profile | CJ-45 Carve |
Peghead Profile | Haircut |
Neck Joint | Mortise & tenon hybrid |
Truss Rod | Fully adjustable |
Frets | Medium 18% nickel-silver |
Peghead Veneer | Ebony with MOP Collings logo |
Tuners | Nickel Waverly w/ Ivoroid buttons (16:1 ratio) |
Backstrip | None |
Rosette | Single-ring of multiple b/w purflings |
Scale Length | 24 7/8" |
Brace Material | Sitka spruce |
Brace Pattern | CJ-45 Wartime scalloped X-brace |
Body Finish | High gloss nitrocellulose lacquer |
Neck Finish | High gloss nitrocellulose lacquer |
Pickguard | Tortoise |
Strings | D'Addario EJ-17 (.013"- .056") |
Case | Deluxe hardshell case by TKL
|
-----------
Comments
I kinda hope someone buys my Lowden to be honest. Trying VERY hard to get to one electric guitar, one acoustic, one bass, one synth, one sampler.... just got to sell an acoustic and the Hahn electric I have for sale and I'm there Until something shinny appears and the cycle starts again
though I do like the look of your 000-37S!
I’m in a similar phase - trying to get down to one small body, one dread, one electric. I think I was up to about 12/13 at one point during lockdown…
Just done a trade on my Lowden for a little Waterloo... As lovely as it is, its all just made me realise how damn amazing this Collings is. So there might be a Waterloo WL-K going up for sale tomorrow!