It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
Instagram
Instagram
they are all temporarily taped off at present whilst I did the mock up.
the on-on-on, are connected straight across on the underside - I will upload a pic later. nice to know the diagram is basically sound at present. I'll have to hunt down the hums I have; probably a dodgy solder joint
Instagram
I'll mount them all properly next and see what I get.
Here you can see the original tail piece and scratchplate holes filled in - don't seem to be able to remove the bridge posts at present
And here's a mock-up of what the switches will look like - thought it would be easier to solder up out of the cavity. Note each pot with it's on-off and splitting switch - hopefully in the guitar they will look better spaced....
Final rub down is in progress then it's off to be primer/filled before colour application
Good to see a nice long tenon too. Neck join is the weak point of this design but it looks like they have done all they can
Instagram
Zoot indeed
Looking good !
Feedback
Taking the SG in to throw some topcoats at it this Friday - apparently I will be spraying it!!! I thought mates in the profession would do it as a favour lol. Anyway, looking forward to having a go at the proper spraying now - always fancied it.
Hopefully the next update will be with photos of the coloured axe, with only reassembly left to do Here's to hoping!