It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
Remember, it's easier to criticise than create!
Feedback
Remember, it's easier to criticise than create!
Feedback
Will report back.
Feedback
Instagram
Instagram
Feedback
Instagram
Instagram
Feedback
The PRS SE translucent lacquer contained the tint and it was nigh on impossible to match.
Finally made some progress. I used the soldering iron & wet rag to get the majority of the dent out successfully. repaired the surface with superglue and lots of sanding elbow grease. (There's an attempt to tame the girth of the neck, to be continued before I go with an overall clear coat).
I've had a fair bit of poly rattle can experimentation over the intervening 2yrs, but yesterday sanded it all right back (gawd Korina is an extremely dull pale white colour and very dusty to sand - mask needed.
Anywho ... red & translucent gold burst is the result, pretty pleased with it.
Got a Mojo Mojotron for the neck and a Goldfoil for the bridge incoming.
Feedback
Oh I also forgot, my Black & Decker "Mouse" sander blew up yesterday - big cloud of blue smoke ! - I wasn't pressing hard or putting any strain on it. Local Screwfix to the rescue !!!!!
Feedback
Feedback
Looks a bit Cherry Sunburst I suppose - it's actually Montana Acrylic Translucent Tomato Ketchup and Translucent Gold, with Acrylic clear varnish.
Have to say I'm rather pleased with my spraying/sanding handiwork !
Feedback