Just wondering if something exists that does exactly what I want?
Basically I'm going down the preamp/poweramp route and I'm looking at getting 4 pedal preamps. I don't want to do the tap dance to switch 'amp' so I want a 4 pedal looper so I can stick each preamp in an individual loop. I know I can get a Joyo PXL4 and set up 4 patches so that each patch just has only one of the loops engaged but I wondered if there was something simpler that could do it that didn't require programming. Basically all i need is a set up where each loop is assigned to each pedal, but rather than adding loops in with the switches I want it so that each foot press disengages all other loops except the one I just pressed. (So if im playing through a clean pedal in loop 1 and I want to switch to a dirty pedal in loop 3, all I have to do is hit footswitch 3 rather than disengage 1 first.)
Is there a 'mechanical' way of doing this or is a programmable looper such as the PXL4 my only option?
Check out my band
Coral Snake if you like original hard rock!
Comments
You could always inquire with the UK based looper people- Bright Onion, Buzz Electronics etc.
Don't talk politics and don't throw stones. Your royal highnesses.
Seems like a sledgehammer to crack a nut for what the OP's trying to do.
Don't talk politics and don't throw stones. Your royal highnesses.
gig rig quarter master sounds like the easier 'non-programming one'
Buzz electronics do a 4 way switcher off the shelf, but have heard they're not the most user friendly interface.
they use the 4 way quartermaster in this and show it working how you'd want it ...20.50