It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
http://i.imgur.com/4EH9Ec9.jpg
Neck, someone has put the headstock on the wrong way up and the heel end of the neck is the wrong shape, I can fix one of these issues!.....
Neck
http://i.imgur.com/CUdNPWG.jpg
Trem, was going to hack the pickup casting off the proper Bigsby, but then remembered I have a copy, which is made of something heavier than a small planet, so, good job its a Thinline...
I have the arms etc somewhere
Bigsby
http://i.imgur.com/Sr95KLs.jpg
Copy
http://i.imgur.com/Jl7iV7o.jpg
I have a roller bridge on the way from @guitarcookie1 ;
Bastard son....
http://i.imgur.com/6wRCJqa.jpg
Just found a rattle can from last years Challenge, so that will do.....
http://www.thefretboard.co.uk/discussion/61134/sarge/p1
Bandcamp
edit**** this... https://www.axesrus.co.uk/Roller-Nashville-Les-Paul-bridge-w-4mm-Stud-Holes-p/bm015.htm
http://i.imgur.com/dPQ61Sb.jpg
http://i.imgur.com/eB752hu.jpg
Watching with great interest!
Why "Abomination"? you'll see later when it arrives, hopefully in a couple of days, it takes Tele hardware but with a neck P90......most people will hate it....probably...
Colour is settled too, I'll paint the headstock today, so I'll post photos later.....
Hardware "kit" is
Brandoni Left hand Tele neck, which Ive had for at least 15 years on various bitsas
Locking tuners
Butterfly string tree
Custom body
GFS Tele roller bridge
Modified Bigsby
Towner Down string tension bar
Creamery Tele size P90 bridge pickup
Mojo Soapbar P90 at the neck
The Lap Steel pickup may feature
Tele control plate
Subtle it aint.....
http://i.imgur.com/GK8QkmO.jpg
http://i.imgur.com/B5veo3H.jpg
http://i.imgur.com/I3qWCTi.jpg
Trem arm pivot point bolt was FUBAR so got drilled out and and Stainless Allen bolt now does the job, with a Nylock nut on the back......
http://i.imgur.com/r81dUBk.jpg
http://i.imgur.com/aGcHibC.jpg
http://i.imgur.com/VrIxxMD.jpg
It would be great to be able to knock up some bits as needed like you've done here.
Nice one!