It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
You could even try the C12R, although I find that too thin-sounding and lacking body, as well as quieter - it's probably too low-sensitivity for a 5W amp to get much useful volume when you're not playing at home.
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein
http://www.thefretboard.co.uk/discussion/151190/fs-celestian-12-alnico-cream-8ohm#latest
Impedance matching only really matters between the amp and the attenuator - which is what it sees as the load - not the attenuator and the speaker, as long as the attenuator is set to at least 3dB down. The speaker impedance doesn’t matter at all below 6dB down.
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein