FS: Studer A810 & A812

eric_

Studer A812.
Machine has been professionally assessed and reported to require the following work -

New pinch roller.
New bearings on 2 x tension arm rollers.
Mechanism needs to be cleaned and lubricated.
Pinch pressure needs to be adjusted.
Mechanical and audio alignment required. 

http://imgur.com/gallery/LTQNCp8

Studer A810.

Includes cart which is not shown in photographs.
Machine has been professionally assessed and the following comments were reported -

Cap on spooling motor control PCB to be replaced.
Transport good.
Pinch roller ok.
Audio control on Ch. 2 not working so no audio from Ch. 2 (fault is either on logic control board or audio line board). Ch. 1 ok. 

http://imgur.com/gallery/mO2PJsP

Difficult to price these machines however examples similar to this (although in good to excellent condition) across Reverb & eBay over the last couple of years have been listed for between €3,900 and €6,000. With that in mind going to look for €2000 each on these. Located in Ireland so shipping would need to be arranged for UK.

lento

Do you know the history of these - are they ex-broadcast ?

eric_

I can't say for sure where they originated from. I believe they were bought and shipped from the UK in early to mid 2000's by a family member who had a home recording studio. They were used (how much I can't say for sure) between then and around 2010. They've had essentially no use at all since then.