Help me identify some pickup specs!

skunkwerx

Going to be putting these up in the classifieds, but I’m not too fluent in certain aspects. 

They’re a pair of Seymour Duncan’s, an Sh-4 JB and an Sh-1n (59), with gold covers. 

Came out of an Ltd Ec-1000. 

The pole spacing measures 58mm or thereabouts. I guess thats standard? 

What about the leg length? I don’t know the differences here. 

Also they have 4 core’s, but theres a random 5th bare wire.. 

On one pickup it is soldered/attached to the green wire, however on the other pickup the wires arent attached?

As for the price, whats reasonable ya think? 

Seem like they’re going for £110 each new. 

Both cables above, bit hard to picture.. 

Funkfingers

Polepiece spacing is normally measured centre to centre, between the outermost screws or studs. Gibson spacing is 48.5mm. Duncan Trembucker spacing is 52.5mm.

The bridge position pickup in your photograph has the short elevator screw lugs. This and the four-conductor + shield output cable are normal on Duncan OEM pickups.

I would leave the output conductors as they are. That way, the purchaser can reconfigure them for any mode switching scheme under the sun.