It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
Pickup hots to the outer lugs of one half of the switch, output from the middle lug of the same to the volume. Make sure everything's earthed and Bob's your uncle.
Things could become tricky/messy if your humbucker has single conductor + braided shielding output cable.
If we label the terminals used in the Warman diagram as A1, A2 and A3, you would need to cross link terminal A1 to B1, A2 to B2 and A3 to B3.
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein
Care to recommend a good quality push push?
And, extremely important to remember - never try to take the knob off when the switch is in the down position - you'll break it. Some of them are fragile enough that even making the mistake of thinking it's a push-pull and trying to pull the switch up can do it - Yamaha ones were notorious for that.
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein