It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
What you could then do if you're planning to split the pickup is add a 470K resistor which is engaged along with the coil tap, to simulate a 250K pot.
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein
Somehow I managed to get it wired with a push pull on the volume so that it splits both coils, so it gets some interesting sounds.
Motherbucker is something like 16k, so the neck is very 'warm' sounding, but it splits very nicely, and the middle position is very LP like.
If I could do it, anybody can, my soldering skills in a tele are adequate at best.
For the lower output setting the handiest thing is rolling down the tone knob slightly (that's what I did with mine, it worked well, that was before I was aware of fancier wiring options!)... or you can do what @ICBM suggested with a resistor... or I guess another option might be 250k pots with a no-load tone pot (and again roll the tone down slightly so the tone pot is engaged for the lower output setting).
https://youtu.be/DE9N8TZyYBw