OK, I understand this might be extremely obvious to a lot of you on here, but I thought I'd better check first, mainly because I'm a tight Git.
My Roland Cube 80XL can connect to an external speaker if I so wish.
To quote the manual EXACTLY
"When connecting to an external speaker, make sure the speaker conforms to the following specifications"
Impedance 8 OHMS or less
Allowable Power Input: 80 Watts or greater.
So I have a Bogner Goldfinger 2X12 Cab to go with the Bogner Head, the cab contains 1 X G12 H30 and 1 G12M Greenback. So I assume I will only have an allowable power input of 50 watts here???
I take it I am likely to have to spend some cash????
Some tech savvy bods round here might know a way I can work it, or not as the case may be.
Thank you.
.
Comments
Also, Celestions tend to be conservatively rated, and the Roland is unlikely to be, so as long as you don't really crank it - if you can still get a completely clean sound at the volume you intend to play at, you won't be - then it's probably safe even if the cab is 8 ohms.
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein
The matching cab for the egnater I had at the time would have cost just under that closer to the 300 mark. Going for the Zilla got me a custom cab made in the UK instead of an off the shelf unit made in China.
Here's a pic of mine hanging with my Jooky Esquire
https://m.flickr.com/#/photos/jwsproductions/9437538044/
*An Official Foo-Approved guitarist since Sept 2023.
*An Official Foo-Approved guitarist since Sept 2023.
Seriously: If you value it, take/fetch it yourself