It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
Instagram
I was worried I had done the neck angle too low, and when I strung it its at 1.5mm with the bridge decked... but thankfully I have some extra height on the chunky saddles to get it lower than that if needed. Although that's probably where I would set it anyway
Instagram
I just wired it up, which was nice and easy since everything is earthed via the plate.
Just a switch cavity and jack plate to make out of aluminium. I also need to make a new nut as this one is a spare I just have shimmed in place for now.
I think I'm going to do a little bit of ageing on it all too... not too much though.
Instagram
I've added a little age to the nickel parts a few chips to the finish and its starting to craze nicely. the rest of the metal has been left pretty shiny if its chrome, or left with a dull sheen if its aluminium. I like the variety of metal colours and patinas, and think it ties in nicely with the originals.
Weight is a smidge over 8lbs
Instagram
Did you make the bridge? It sort of reminds me of a (much) less amateurish version of my "13A plug saddles" one.
Instagram
The aluminium plates don't really do much to the tone... but it is very well shielded against noise
Instagram