Amp chassis stand

robinbowes

I decided I needed an amp chassis stand, and did a bit of a search ot see what's available.

I found this link in a post on tgp: http://modulusamplification.com/FREE_CABINET_PLANS-W6.aspx but the link seems to be dead.

@modulus_amps I don't suppose you know where it's gone, do you?  

Modulus_Amps

Here you go

https://www.mediafire.com/file_premium/jmdmmnwmtu3/AMP-CRADLE_-_1.1.pdf/file

It used to be on a number of forums, but can't see the links now. I know some people made them a little taller and wider for larger amps.

robinbowes

Thanks, good tip - I'll be using it with "larger amps" (Marshall 4211, Fender SF Bandmaster Reverb) so I'll investigate scaling up.

Cheers,

R.

ICBM

I’ve always done it by lying the casing of the amp (head or combo) face down, usually with the top facing towards me, and resting the chassis in it.

PrecisionGuided

I've always used a stout cardboard box with a hole cut in it for the valves and transformers
Works great for smaller amp chassis but a big Marshall head is way too heavy.

robinbowes

PrecisionGuided said:

I've always used a stout cardboard box with a hole cut in it for the valves and transformers
Works great for smaller amp chassis but a big Marshall head is way too heavy.

Guess what I'm working on?