El Cap V2

Hootsmon · February 21

Dang, I see there is now a V2

Just wondering.....what kind of gizmo does one require to access the midi 300 changes?

Hootsmon · February 21

Does that mean something like this (below) would give me 20 presets with the EC?

https://www.thomann.de/gb/one_control_gecko_mkiii.htm?glp=1&gad_source=1&gclid=CjwKCAiA29auBhBxEiwAnKcSqiFEzsE7P1KpIJ2QqJZJEIQrS8T8WS2fp9TXRF8hl0hHBmOLVtBlDRoCJO8QAvD_BwE

hotpickups · February 21

Boss Es-5/8, DPC-5 gen 3 , G2/G3 etc would all do that for you

Hootsmon · February 21

Would that wee simple one in my 2nd post not cut it?

hotpickups · February 21

Hootsmon said:

Would that wee simple one in my 2nd post not cut it?

I can’t see why not. It only needs to send a PC command. However, I have no experience personally of that particular unit tbh

hotpickups · February 21

This would do it too but one would only be able to cycle up or down the midi presets I.e. not jump to a certain number preset ?

https://www.hotroxuk.com/tech-21-midi-mouse-foot-controller.html?utm_source=GoogleBase&utm_medium=organic&gad_source=1&gclid=EAIaIQobChMIie_YyMe9hAMVV41QBh0QNwVOEAQYAiABEgK7R_D_BwE

dangriffiths · February 22

You will need a MIDI controller with TRS or one of these cables otherwise:
https://www.strymon.net/product/midi-exp-cable/

Hootsmon · February 22

hotpickups said:

This would do it too but one would only be able to cycle up or down the midi presets I.e. not jump to a certain number preset ?

https://www.hotroxuk.com/tech-21-midi-mouse-foot-controller.html?utm_source=GoogleBase&utm_medium=organic&gad_source=1&gclid=EAIaIQobChMIie_YyMe9hAMVV41QBh0QNwVOEAQYAiABEgK7R_D_BwE

What Hotpups is saying here.....What is available that WOULD be able to jump to certain presets but in the smallest footprint?

DoctorX · February 22

Morningstar MC3 can do it. Not sure if there’s anything smaller. I guess Disaster Area Midi Baby would probably do the job.

Hootsmon · February 22

I don't suppose with all this new fangled midi you can get a Ms read out (from the El cap) on the midi display,no?

DoctorX · February 22

My Morningstar MC8 shows the m/s reading if I set the tap tempo by the midi controller. You can choose specific M/s per preset by midi clock. This video shows the general idea:
https://youtu.be/kg9gAWZAl_I?si=zxEqn8pM5fd9GpQ8

hotpickups · February 22

DoctorX said:

Morningstar MC3 can do it. Not sure if there’s anything smaller. I guess Disaster Area Midi Baby would probably do the job.

Disaster Area DPC 5 would definitely do it as that is what I use currently to do it with the el cap v2

Howdy, Stranger!

Categories

In this Discussion

Become a Subscriber!

El Cap V2

Comments