Individually height adjustable archtop bridges?

Strumit

My archtop (Ibanez Artcore with vibrato) has a curved fretboard but a flat roller bridge, meaning that the third and fourth strings, sit closer to the frets as you get further down the neck.  To avoid fret buzz, the "flat" bridge height adjustment needs to go up, bringing the outer strings fractionally too high?  My stratalike has individually height adjustable bridge roller saddles.  Is such a thing available for an archtop?  (Or am I just too picky? - bit of a "techy"!)

Strumit

Similar to this but they are not individually height adjustable!

ICBM

The Gretsch 'space control' bridge isn't individually adjustable, but does have a radius (12" I think) by having rollers of different sizes.

https://www.ebay.co.uk/itm/145219751884

stickyfiddle

I'd go for a fixed bar bridge over a roller imo. Fixed but correct radius, and add domed thumbwheels if it needs any help staying in tune. 

Strumit

I think that I may have found something!

Thank you for your suggestions, I'll do some measuring and thinking!

Strumit

ICBM said:

The Gretsch 'space control' bridge isn't individually adjustable, but does have a radius (12" I think) by having rollers of different sizes.

https://www.ebay.co.uk/itm/145219751884

Oooh!  That looks the dog's doodahs!

WezV

Worth checking aliexpress on these, those gretsch ones are approx £20.  Many of the other styles are often on there too.

Strumit

WezV said:

Worth checking aliexpress on these, those gretsch ones are approx £20.  Many of the other styles are often on there too.

Okidoke, I'll have a look there.  I believe that the neck is a 12" radius.  This one looks OK on there apart from the flat base.

Strumit

Strumit said:

Similar to this but they are not individually height adjustable!

When I "zoomed in", The saddles are stepped, so don't in fact need adjustment! Doh!

WezV

Strumit said:

WezV said:

Worth checking aliexpress on these, those gretsch ones are approx £20.  Many of the other styles are often on there too.

Okidoke, I'll have a look there.  I believe that the neck is a 12" radius.  This one looks OK on there apart from the flat base.

check the spacing on posts as where possible its always best to use the existing bridge base.  if not,it is normal to have to do some fitting whenever changing to a new base

I don't think that does have a flat base, it's slightly curved.

elstoof

These Bigsby ones have domed bottoms so will rock on the thumbwheels

https://www.gluedtomusic.com/products/4297/bigsby-compensated-saddle-for-archtop-guitar-bridge-aluminium/?campaignid=20504463044&adgroupid=&keyword=&gclid=Cj0KCQjw8pKxBhD_ARIsAPrG45mX3G04bQ2nU2uEMhmbLaJdv-9Ese9FIT9IlwAj8V2GFYKPJGLOz7waAitAEALw_wcB&gad_source=1

Strumit

Arrived with dodgy allen key headscrews, so replacement now on it's way! Doh!  Just my luck!