Apologies if this is a little troll like. I'm unsure if I want to sell my custom built Shuker T style.
I don't play it anymore and it's too good a guitar to not be used. I'm gauging interest.
Fitted with Seymour Duncan JB and Jazz pickups, a killswitch and an evertune bridge.
Alder body
Maple Neck with carbon fibre reinforcement.
Dual action truss road adjustment at base.
Plays wonderful and is great for some C standard heavier stuff.
Cost £2k to have made, would be looking for about £1200.
Full spec here
25.5” scale
22 fret
neck dimensions as your strat neck
Modern C ISH, 9.5" radius, it's slightly chunkier, more traditional Tele shape
Maple neck
Maple f/board
two way truss rod (heel adjust)
carbon fibre reinforcement
Tuaq nut
medium fretwire, stainless steel
satin neck lacquer
3mm blue luminlay markers on top edge
no dot markers on face
Schaller locking tuners black
Alder body
Black binding
polyester basecoat
Satin Artic white finish coats
B single ply pickguard
routed for 2x humbuckers
black hum bucker surrounds
Black Evertune bridge
Seymour Duncan JB and Jazz combo’
Scaller strap locks
Recessed Black electro socket, switchcraft jack
3-way toggle (LP style) and master vol (possible killswitch), CTS pot (500K) Switchcraft Black toggle
Black control plate
Comments