So I have a few things set up on an Expression pedal so that when heel is down things are clean and there's some delay and modulation and when toe is down the mod is out, the reverb is lower and gain is high. What I'd love is to be able to have an OD kick in just for the last 30% or so of the the pedal's travel, but also for it to blend in across that travel rather than just kicking in at full tilt when the pedal goes past 70% (I know how to do that using pedal position for bypass).
So I guess the question is whether there is a way to blend something in from 0-100% on the last 30% of the pedal's travel.
I suspect not, but thought I'd check!
Comments
like the Source Audio Reflex, if you can find one.
I’m so bored I might as well be listening to Pink Floyd
you would need to set the "bypass" of the OD pedal to be off <70% , on >70%.
Think I did it using the learn controller function, then setting the level.
not sure if you'd then be able to go from 0-100% on the pedal gain (for example). Think you'd need to compromise on the start and end point of the OD blend
I almost bought one and then realised I just wouldn’t use it enough. So I didn’t.
I’m so bored I might as well be listening to Pink Floyd