pick up rings.

markblack

I'm looking for a pick up ring that's around 2mm / 3mm high for a humbucker. It needs to be about 46mm deep.

Anyone know a good place to find different sixed humbucker rings?

Cheers

Mark

Adam_MD

Different types on here dude

http://www.axesrus.co.uk/Humbucker-Rings-s/2219.htm

Adam_MD

stoopid double post

markblack

@Adam_MD

Cheers, alas not got the size I'm after. I did find a place that makes them. www.fretsonthenet.com

looking for these dimensions. Just not slanted, maybe 2mm or 3mm deep.

guitargeek62

Sand it down from the base, should be simple enough.

markblack

@guitargeek62 probably if I want's cack handed!

Nomad

What happens if it's smaller than 46mm wide? Two here that are flat and around the right thickness, but slightly smaller than 46mm wide...

http://www.axesrus.co.uk/1-x-Completely-Flat-Metal-Humbucker-Ring-Open-Face-p/pr8945.htm

http://www.axesrus.co.uk/1-x-Flat-Plastic-Humbucker-Ring-3mm-high-p/3mmhbplastrings.htm

ADP

I might have what you're looking for. I'll have a look when I get home.

markblack

@Nomad The problem I have is there are holes drilled for a another pick up ring and if I go any smaller you will probably see them, so walking a fine line  

@ADP be handy if you do! Let me know and I'll have it.

M

Nomad

markblack said:

@Nomad The problem I have is there are holes drilled for a another pick up ring and if I go any smaller you will probably see them, so walking a fine line  

That depends on the pitch of the existing holes. The diagram you posted doesn't give the pitch, so the only way to really be sure is to measure it and then see if matches, or not, other pickup rings.

GuitarMonkey

How about these? http://www.allparts.uk.com/collections/pickup-rings-surrounds/products/metal-humbucking-pickup-rings-flat

ADP

Sorry. It turns out I have a 3mm one that's the wrong size and a couple that are the right size (maybe a mm smaller actually) but angled.

markblack

@ADP thanks anyhow.

markblack

@GuitarMonkey thanks for that. Couldn't see a size so hard to tell.