SOLD. Lehle Dual A/B

lento

Soundblox Pro Envelope Bass Filter SOLD

Just bought this on a whim, but not sure I can make the best use of it, so passing it on for what I paid.
Fantastic possibilities and Youtube demos .......

Boxed, manual, in excellent condition, velcro on bottom but feet included.

£100 PPGift collected or + £8 for UPS delivery (or arrange your own)

 

Lehle DUAL A/B  SOLD

£70PPGift collected or + £8 for UPS delivery (or arrange your own)

Excellent condition, wonderful craftsmanship, the nicest footswitches ....... why aren't more pedals built to this standard ?
No box but will be well packed.

Maybe open to trades ..... Polara .... WHY ....

shaunm

Pm

lento

Soundblox on hold .......

lento

Soundblox **SOLD**

Lehle still available .......

lento

bump ...

IvisonGuitars

That Lehle is a bloody bargain, I have one, world class piece of kit! @hotpickups - just saying ;-)

hotpickups

Oh god. My poor bank account

lento

Bumping .....

The Lehle Dual enables you to switch between amps

via gold-plated relays. The signal is routed with no

semiconductors and no corruption to Output A or B.

1 The input signal enters this socket. The signal is automatically routed

to A and B if the Lehle Dual is not energized.

2 These trimming potentiometers make it possible to reduce gain for

Output A or B if the pedal is in Dual-mode. A gain of 6 dB can therefore

be balanced out during parallel operation of two amps. For example, by

using a high-gain amp on A and a clean amp on B a slightly distorted

sound can be created within the definition of the clean amp (B) and the

attenuated high-gain (A).

3 The signal is routed directly and without semiconductors via goldplated

relays to Output A or B provided the button for A or B has been

pressed. The other output is then muted. A is electrically isolated from B

by means of a high-end line splitter humming loops are thus impossible,

even if A and B are switched on simultaneously. Externally influenced

hum-noises could appear with certain combinations of amps. In this

case, put the groundlift-switch (situated beneath the socket of the output

B in the interior of the switch) to ‚on'.

4 The Lehle Dual requires a power supply of between 8 and 20 V.

Polarity is of no importance. The supply voltage is internally rectified and

stabilized in order to guarantee trouble-free operation. A thermal cut-out

automatically trips and switches the unit off if a short-circuit occurs. A

correctly fitting plug connector for the power-supply socket is supplied

with the Lehle Dual. This can be soldered to the required power unit if

necessary.

5 Every Lehle Dual can be retrofitted with a DIN socket without

difficulty in order to permit parallel operation with other Lehle switches

in master/slave mode.

6 The high-intensity LEDs installed behind a magnifying lens make it easy

to read the switching state (A, B or both) even under spotlights.

7 The buttons which control State A or B are actuated inside the switch

by means of a virtually indestructible switching mechanism.

8 The base of the Lehle Dual can be secured without difficulty. First

remove the four housing screws for the cover, and then screw the base of

the switch to a base-plate using the two

Screws supplied with the unit, the washers and the spacer elements.

Technical Data:

Weight: 670g

Length: 4”

Width: 5.9”

Overall Height: 2.18”

Voltage: 9-20V DC or A