FS: Compton bridge for Gretsch/floating bases SOLD

Corvus

Compton stainless steel bridges. Intonation compensated - very close if not perfect at the 12th. Had several of these, popular with Gretschistas.
Increased clarity, note separation and a bit of sustain.
Suitable for floating bridges, or pinned where angle is straight, no slant. Not suitable for fixed TOM types or Jets.
12" radius, 74mm stud centres, 2" string spacing. Fits 512x, 542x, Prolines
£40 delivered
SOLD

Bigsby B6. Slightly shortened tail bracket, shaved a little off to fit a thinline, vgc cosmetics. £65 delivered.  Sold

B5 Vibramate. Vgc. £35 delivered. Sold

Chet arm and bracket for US Bigsbys (for licensed ones the hole you can see up top needs hogging out from 9.5mm to 10mm - dead easy). £35 delivered. sold

Compton drilled out to 6mm, it was fitted to an Ibanez Artcore AF75. £30 delivered. Sold

Schaller roller 452, TOM replacement. Comes with adaptors to M8 threaded bushes I bought separately.
£25 delivered. SOLD

smogfalls

pm'd

Corvus

Replied. Just for info the Vibramate is for US Bigsbys, not the licensed B50, and needs Gibson type tailpiece bushes & spacing. It has both metric and US thread bolts with it.

TheMarlin

Hey, @Corvus.

I'll take the 12" Compton for my TA.

PM me

note: not the drilled out one.

Cheers

Paul

Corvus

Cheers Paul. PM incoming.

Corvus

Bump. Bigsby & Schaller sold, Compton back for sale