It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
Ebay mark7777_1
The proper way to do it is with a transformer-isolated 'through' box, but often simply cutting the shield connection in one of the plugs works fine. If that increases noise, try putting a 100-ohm resistor in the gap.
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein
There's things I've had, there's things I wanna have"
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein
https://www.rapidonline.com/AV-Link-201-086UK-High-Quality-Ground-Loop-Isolator-35-4561?IncVat=1&pdg=pla-294357559827:kwd-294357559827:cmp-757438067:adg-44804851896:crv-207912323492:pid-35-4561:dev-c&gclid=CjwKCAjwzenbBRB3EiwAItS-u5o6OpkSblD1RLQ801uUQYxWMcYgwiMH_RMBwyc4suFiqhIB0PfVWRoCkNoQAvD_BwE
Yes, I know it is 2 channels and yes, you have some cable swapping/adapting to do but at that price?
They work fine. MORE than good enough for geetar!
Dave.
That thing looks spot on ecc83, I'm guessing I would just need a couple of 1/4 in to RCA adaptors and just run it through one of the channels you reckon?
The phase switch is very useful if you have three different amps that you pair up in different combinations and one operates out of phase from the other two.
Cannot argue with that.
Dave.
https://www.gear4music.com/Recording-and-Computers/Behringer-MICROHD-HD400-Hum-Destroyer/6RR