It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
ive only got one scrap piece of skirt left so you’ll have to pretend that the bit of paper is another piece of skirt!...
cut one piece to length and leave the end square... place an off cut against the second board like below:
It will then fit snug as a bug and won’t matter if your wall are pissed (which they will be)
you will have to mitre the corners around the chimney stack but that will be a doddle compared to trying to mitre internal corners...
”measure once, cut five or six times, go back to Howdens and buy another 4.2 length!”
If you buy a Coping Saw (around £10) https://www.screwfix.com/c/tools/coping-saws/cat9790017
This is the proper method:
https://youtu.be/tQ21WE4KGfw
https://www.studiowear.co.uk/ -
https://twitter.com/spark240
Facebook - m.me/studiowear.co.uk
Reddit r/newmusicreview
Bout dem kerf cuts then?
Call uncle Clifford, who's been a chippy for over 50 years. Have him come round and do it, and buy the wood on his trade account.
He did all of our new house and studio over 5 days, and all it cost me was £120 on timber. He won't take money for the labour. PS...not a power tool in sight. Every cut was done with a hand saw of some kind, and his tools are all older than me!
My Trading Feedback | You Bring The Band
Just because you're paranoid, don't mean they're not after youThe profile of boards I went for was a beveled edge sort of thing, which made coping the internal corners a bit of a ballache. I think torus would've been easier quite honestly! But I got there. Few bits that aren't as tidy as I'd like, so going to fill them with sawdust+PVA glue. Fortunately I had one of those collector bags on the back of the chop saw, so got plenty of MDF residue I can mix up with PVA!
Tomorrow is about removing the radiator, putting insulation tape across the bottom of each panel, and then fixing to the wall.
I think the external mitres I am going to glue together first with some mitre mate or something.
Oh and of course I need to fill and sand the kerf'd bay window round section.
My Trading Feedback | You Bring The Band
Just because you're paranoid, don't mean they're not after you