It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
http://www.theboxwoodchessmen.com/
https://www.facebook.com/tingiants/?view_public_for=231700547508938
If the wiring has push connectors, the simplest way to test if it’s the wiring or the speaker is swap the connections round. If the V30 remains dead, then it is.
Some speakers - particularly Eminence, which have the connections crimped not soldered - can develop a bad connection between the terminals and the cone braid, but Celestions are soldered so it’s less likely. If the speaker is disconnected, metering directly across the cone braids will tell you if this is the problem.
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein
Yes, if they're in parallel.
If it is dead, sometimes speakers just do that even if there doesn't appear to be any real reason it's blown - it will usually be caused by a manufacturing fault in the voice coil. I've come across a couple of Celestions like that - both UK-made, not Chinese ones. When dismantled to find out why, there was a cold solder joint where the cone braid joins the voice coil - unfortunately unrepairable without destroying the cone.
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein