Trading feedback | FS: Benson Stonk Box
JM build | Pedalboard plans
It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
*An Official Foo-Approved guitarist since Sept 2023.
*An Official Foo-Approved guitarist since Sept 2023.
Happy day after St Paddy's Day everyone
In any case I only have one decent cable of the length I want - so I'd need to buy at least two more for the DIY solution. (I don't need a footswitch - at least not for my current amp).
Also, I notice that the CPB loom has right-angled jacks at the board end. Having winced as people plodded around near the straight jacks sticking out of the back of my board during soundchecks, that suddenly seems like a really good design choice.
JM build | Pedalboard plans
Don't talk politics and don't throw stones. Your royal highnesses.
My snake is as follows.
1x midi
2x switch cables
1x trs exp controller
1x guitar signal cable
combination of cable ties and Velcro straps.
Colour coded on the ends to corresponding jacks on my pedalboard/controller.
set up time is minimal as it's all plugged in to the back of my rack setup permanently, so all I have to do is plug in the power, speaker cable and pedalboard.
Takes about 30s
Supportact said: [my style is] probably more an accumulation of limitations and bad habits than a 'style'.
*An Official Foo-Approved guitarist since Sept 2023.
Don't talk politics and don't throw stones. Your royal highnesses.
Go for larger that you think you'll need otherwise the bundle becomes too stiff.
Really..... it's the sweetest thing.