It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
The reason I've got so much noise is because some of the pedals are directly above my PP2+ and that adds loads of RF to that particular pedal. If I move it... it goes away.
I hadn't even thought of that.
I;ve had issues with daisychaining pedlas in the loop and upfront.....
Ringleader of the Cambridge cartel, pedal champ and king of the dirt boxes (down to 21)
When I have the TC Nova Modulator in the chain, it introduces noise and hum, and this is worse the closer it is to the PP2+. If I replace it with my Phase 90, the noise and extra hum basically goes away.
What is weird is the Boss units were generating a shit ton of hum when the TC Nova was in the chain too, but not when the Phase 90 is.
What is even weirder is that I was getting all of this hum even when bypassing the Nova Mod completely using the Decibel 11 switching unit.
I am confuzzled. I've stripped my board down to the bare essentials, and for the time being have taken the D11 switcher off the board. Tonight's gig needs to go smoothly, so I'm going with as little complications as possible. Will sort this out and do some more testing after the gig.
Kinda weird it still happens when the Nova is completely bypassed, though...
Have you tried slipping something between the Nova and the PSU as a shield?
Ringleader of the Cambridge cartel, pedal champ and king of the dirt boxes (down to 21)
I wasn't thinking like that, but as you mention it.......
Just anything as a basic shield to see if that'll make a difference.
Ringleader of the Cambridge cartel, pedal champ and king of the dirt boxes (down to 21)